Search form

Your shopping cart is empty.

Construction

Construction

Construction Workplace Exposure Limits

Detect workplace hazards. Protect your people.

Construction is expected to be significantly affected by the updated Workplace Exposure Limits (WELs) commencing on 1 December 2026, with changes relevant to contaminants generated across construction activities.

Start dates differ by state. Victoria and Queensland have given softwood dust, Portland cement, bitumen fumes and diesel particulate matter a transition to 1 December 2029, and NSW has an interim diesel limit until 30 June 2028. The respirable crystalline silica limit is not changing on 1 December 2026. See the table below and our state-by-state dates.

Cutting, grinding, demolition, excavation, welding, painting and the operation of diesel-powered plant can expose workers to hazardous dusts, fumes, vapours and gases. The revised limits provide an important opportunity for construction businesses to review these exposures and existing controls.

Book an Assessment

Alt

Construction
Online Checklist

Find out what changes are relevant to your industry.

Online Checklist

Is Your Construction Business Affected?

If your business undertakes any of the following activities, the revised Workplace Exposure Limits may affect your workplace.

Alt

Concrete Cutting & Grinding

Demolition

Demolition

Excavation and Earthworks

Excavation & Earthworks

Alt

Welding & Fabrication

Alt

Painting & Coating

Carpentry and Timberwork

Carpentry & Timber Work

Alt

Diesel Plant & Equipment

Road & Civil Works

Road & Civil Works

Enclosed-Space Work

Enclosed-Space Work

Construction Workplace Exposure

Common Workplace Hazards: Respirable crystalline silica and other construction dusts

Primary Workplace Exposure Considerations: Airborne dust generated during cutting, grinding, drilling and other work on silica-containing materials

Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring

Download as a PDF

Key substances for construction: state start dates

The new national limits are the same everywhere. When they apply depends on the state.

SubstanceCurrent standardNew national limitNSWVictoria and Queensland
Respirable crystalline silica0.05 mg/m³0.05 mg/m³ (unchanged)No changeNo change
Wood dust (softwood)5 mg/m³ (10 mg/m³ STEL)2 mg/m³From 1 December 2026Current standard until 1 December 2029
Portland cement10 mg/m³ (inhalable)1 mg/m³ (respirable)From 1 December 2026Current standard until 1 December 2029
Bitumen fumes5 mg/m³0.5 mg/m³From 1 December 2026Current standard until 1 December 2029
Diesel particulate matter (as respirable elemental carbon)No specific limit0.01 mg/m³0.05 mg/m³ until 30 June 2028, then 0.010.1 mg/m³ until 1 December 2029, then 0.01

Values are 8-hour time-weighted averages unless noted. South Australia has delayed flour dust, grain dust, methyl bromide and phosphine to no earlier than July 2028. Western Australia has delayed phosphine to 1 December 2029 and put diesel changes on hold. Other states and territories follow the national dates. Checked 12 November 2026. See Workplace Exposure Limits 2026: Dates by State and Territory for every substance.

Our Four-Stage Approach

Detect workplace hazards. Protect your people.

Alt

1

Detect.

Identify workplace hazards through Occupational Hygiene Assessments, workplace inspections and hazard identification.

Alt

2

Assess.

Assess potential worker exposure and undertake Workplace Exposure Monitoring where required.

Alt

3

Control.

Eliminate exposure where reasonably practicable or reduce it so far as is reasonably practicable, prioritising higher-order controls.

Alt

4

Review.

Review control effectiveness through ongoing assessment and further monitoring where required.

Alt
Alt

Workplace Exposure Limits Breakfast

Join JTA's Occupational Hygienists for a practical breakfast seminar covering:

We run these events often. Register your interest and we’ll keep you informed of the next one.

Our Related Services

FAQs

Ready to Prepare?

Detect workplace hazards. Protect your people.

The revised Workplace Exposure Limits commence on 1 December 2026. Whether you're reviewing workplace hazards for the first time or planning your Workplace Exposure Monitoring program, JTA's experienced Occupational Hygienists are here to help.

Book a Free Consultation