Detect workplace hazards. Protect your people.
Food manufacturing is expected to be significantly affected by the updated Workplace Exposure Limits (WELs) commencing on 1 December 2026, with changes relevant to contaminants encountered across food production environments.
Start dates differ by state. The new flour dust and grain dust limits apply from 1 December 2026 in NSW and most other states, but not until 1 December 2029 in Victoria and Queensland, and no earlier than July 2028 in South Australia. See the table below and our state-by-state dates.
From bakeries and ingredient processing to meat, dairy, beverage and large-scale food production, everyday activities can generate airborne contaminants. Flour and ingredient dusts, cleaning chemicals, refrigeration systems, welding and maintenance activities, and diesel-powered equipment all warrant review as businesses prepare for the new limits.
Find out what changes are relevant to your industry.
The checklist should identify activities and exposures that may be relevant to the business. It should not imply that completing the checklist demonstrates compliance.
If your business undertakes any of the following activities, the revised Workplace Exposure Limits may affect your workplace.
Common Workplace Hazards: Flour dust, ingredient dusts
Primary Workplace Exposure Considerations: Dust generated during tipping, weighing, transferring and handling powdered ingredients
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Flour dust, powdered ingredients, additives
Primary Workplace Exposure Considerations: Airborne dust generated during weighing, tipping and mixing
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Dusts, fumes, vapours and process-specific contaminants
Primary Workplace Exposure Considerations: Exposure varies according to ingredients, production processes and equipment
Recommended JTA Services: Occupational Hygiene Assessment
Common Workplace Hazards: Cleaning chemicals, vapours, aerosols and mists
Primary Workplace Exposure Considerations: Chemical exposure during mixing, spraying, foaming and sanitation activities
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Refrigerants and refrigeration chemicals
Primary Workplace Exposure Considerations: Potential exposure during leaks, maintenance and servicing
Recommended JTA Services: Occupational Hygiene Assessment
Common Workplace Hazards: Welding fumes, metal particulates, grinding dusts, solvents and degreasers
Primary Workplace Exposure Considerations: Multiple airborne contaminants during maintenance and repair activities
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Diesel engine exhaust
Primary Workplace Exposure Considerations: Diesel particulate matter, particularly where diesel equipment operates indoors or in enclosed areas
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Grain dust, flour dust and other airborne particulates
Primary Workplace Exposure Considerations: Dust generated during conveying, transfer, milling and processing
Recommended JTA Services: Occupational Hygiene Assessment, Workplace Exposure Monitoring
Common Workplace Hazards: Process-generated airborne contaminants
Primary Workplace Exposure Considerations: Exposure to contaminants generated by production or adjoining processes
Recommended JTA Services: Occupational Hygiene Assessment
The new national limits are the same everywhere. When they apply depends on the state.
| Substance | Current standard | New national limit | NSW | Victoria and Queensland |
|---|---|---|---|---|
| Flour (cereal) dust | No specific limit | 0.5 mg/m³ | From 1 December 2026 | No limit until 1 December 2029 |
| Grain dust (oats, wheat, barley) | 4 mg/m³ | 1.5 mg/m³ | From 1 December 2026 | 4 mg/m³ until 1 December 2029 |
| Diesel particulate matter (as respirable elemental carbon) | No specific limit | 0.01 mg/m³ | 0.05 mg/m³ until 30 June 2028, then 0.01 | 0.1 mg/m³ until 1 December 2029, then 0.01 |
| Phosphine (grain fumigation) | 0.3 ppm (1 ppm STEL) | 0.05 ppm | Current standard until 30 June 2028 | Current standard until 1 December 2029 |
Values are 8-hour time-weighted averages unless noted. South Australia has delayed flour dust, grain dust, methyl bromide and phosphine to no earlier than July 2028. Western Australia has delayed phosphine to 1 December 2029 and put diesel changes on hold. Other states and territories follow the national dates. Checked 12 November 2026. See Workplace Exposure Limits 2026: Dates by State and Territory for every substance.
Consultant Video Library
Food Manufacturing Knowledge Centre
Workplace Exposure Limit guides
Detect workplace hazards. Protect your people.
Identify workplace hazards through Occupational Hygiene Assessments, workplace inspections and hazard identification.
Assess potential worker exposure and undertake Workplace Exposure Monitoring where required.
Eliminate exposure where reasonably practicable or reduce it so far as is reasonably practicable, prioritising higher-order controls.
Review control effectiveness through ongoing assessment and further monitoring where required.
Join JTA's Occupational Hygienists for a practical breakfast seminar covering:
The revised WELs affect a range of airborne contaminants relevant to food manufacturing. Businesses should identify which substances and processes apply to their workplace and review existing controls before 1 December 2026.
The new flour dust limit (0.5 mg/m³) and lower grain dust limit (1.5 mg/m³) apply from 1 December 2026 in NSW and most other states. Victoria and Queensland have a transition to 1 December 2029, with no flour dust limit until then. South Australia has delayed both to no earlier than July 2028. See our flour dust state table and the guides for Victoria, NSW and Queensland.
No. The need for monitoring depends on the contaminants present, potential worker exposure and existing controls. An Occupational Hygiene Assessment can help determine whether monitoring is required.
Yes. Tipping, weighing, mixing, transferring and cleaning can generate airborne flour and ingredient dust. Businesses should identify where exposure occurs and implement appropriate controls.
Some substances used or generated during cleaning and sanitation may have Workplace Exposure Limits. Businesses should consider the chemicals used, application methods, ventilation and potential worker exposure.
Industrial refrigeration systems can introduce additional chemical hazards. Businesses should consider the substances used, potential leaks and exposure during maintenance or servicing.
Yes. Diesel engine exhaust can expose operators and nearby workers, particularly where equipment operates indoors or in enclosed or partially enclosed areas.
The results can identify activities contributing to exposure and help determine appropriate controls. Businesses should prioritise elimination and higher-order controls where reasonably practicable.
JTA can identify workplace hazards, assess potential worker exposure, undertake monitoring where required and recommend practical controls.